Concrete Patching – Flash Patch
Concrete Patching – Flash Patch is a single component, just add water, cement based chemical patching compound used for concrete restoration and patching of spalled or spalling concrete. Used with a concrete restoration system, it provides a workable, no-slump patch that sets quickly for quicker return to service. Apply slurry bond coat consisting of SureBond mixed loosely with water with a brush to the host surface not allowing it to dry prior to application of Flash Patch. Maximum thickness is approximately 1. For thicker applications add coarse sand or pea gravel at rate of ?? to 1 of dry mix to prevent excessive shrinkage.
Specifications:
Packaging: (1) – 50 lb. bag= .45 cubic feet
Coverage: 12 sq. ft. at 1/2 in
Compressive Strength: ASTM C-109 28 day 6042 PSI
Set Time:
77F
Final 15-30 minutes
Initial 7-20 minutes
Deep Concrete Patch – Deep Level
Deep Concrete Patch – Deep Level is a single component, just add water, cement based chemical patching compound used for concrete restoration and patching of spalled or spalling concrete. Used with a concrete restoration system, it provides a workable, no-slump patch that offers superior bonding power to patch larger spalls in concrete floors, build ramps, repair loading docks, and parking lot pavement. Deep Level also performs well in filling low spots on horizontal surfaces and filling open areas (e.g. planters). The silicate aggregate size will eliminate the usual shrink cracks associated with topping mixes used for repairs. For applications thicker than 1/8? add coarse sand or pea gravel. Apply slurry bond coat consisting of SureBond mixed loosely with water with a brush to the host surface not allowing it to dry prior to application of Deep Level.
Specifications:
Packaging: (1) – 50 lb. bag = .46 cubic feet
Coverage1: 12 sq. ft. at 1/2 in
Compressive Strength: ASTM C-109 28 day 5000 PSI
1 Coverage will increase with addition of aggregate
Cementitious Bonding Agent – SureBond
Cementitious Bonding Agent – SureBond is a single component, just add water, cement based bonding agent specifically developed for SureCrete?s patching products and SureStamp stamped overlayment. Its only function is to join these products to the host surface (i.e. concrete.) SureBond is composed of a high concentration of latex modifier and cement with a very fine sand for aggregate.
Specifications:
Packaging: (1) – 50 lb. bag
Coverage1: 300-450 sq. ft
1 Based upon the porosity of the slab
Broom Restoration – SureBroom
Broom Restoration – SureBroom is a single component (just add water) cementitious topping that can be applied via trowel, squeegee, or sprayed. SureBroom is designed for leveling and retexturing both interior and exterior concrete surfaces. When broomed, it creates a texture that resembles freshly poured and broomed concrete. Typical areas include parking decks, driveways, sidewalks, parking lots or any horizontal concrete surface requiring repair of spalled areas, low spots, etc. SureBroom is applied with a base coat using squeegees, and then broomed. When applied properly the newly broomed surface creates a slip resistant finish that is ready to be sealed to protect against staining. SureBroom is suitable for heavily trafficked areas and is formulated to provide excellent bonding to new as well as existing concrete surfaces including freeze thaw climates.
Specifications:
Packaging: (1) – 50 lb. bag of SureBroom
Coverage: 90 sq. ft at 2 coats / avg thickness 1/16 in
Compressive Strength: ASTM C-109 28 day 6100 PSI
Set Time:
77F
Final 15-30 minutes
Initial 7-20 minutes