Eco-Stain
SureCrete’s Eco-Stain is an exciting alternative to typical reactive acid stains. There are no acids or harmful chemicals integrated in its design. Since no chemical reaction takes place, there is no extended waiting time for color to reach full development. Cement substitutes will not affect color, unlike reactive acid stains that are dependent upon alkalinity to create a chemical reaction. Eco-Stains in blues & greens will not spot black in the presence of moisture And are UV stable.
Eco-Stain penetrates the inherent porosity of cementitious products to produce color. Color may be built up without the worry of spending all the alkalinity, as with acid stain. Eco-Stain saves time on the job with no rinsing, no mopping, no neutralizing, and no residue.
Specifications:
Packaging:
(1) Gallon
5 Gallons
55 Gallon Drum
Coverage: 200 sq ft per gallon
Dilution Rate: Varies from no water dilution to approx. 4:1 / water
Application: Apply first coat of Eco-Stain with SP sprayer on dry surface using caution to avoid track lines from the spray pattern. A circular motion with the wand is desired. Eco-Stain may be applied full strength or diluted with water to desired rate. Applying additional coats of Eco-Stian is optional. Supplementary colors may be combined at desired rates and number of coats. Customarily apply lighter colors first. In addition to spraying, some contractors employ mopping, sponging, and ragging, especially for accenting. CLEAN-UP None, simply allow to dry.
PDF Download Eco-Stain Color Chart (791K)
SureStain
SureStain is not a typical stain or dye. It is made from a very mild hydrochloric or phosphoric acid solution, wetting agents, and metallic ions (salts), and specially formulated pigments. When applied on concrete or any cementitious topping the metallic ions chemically react with the free alkaline in the cement forming oxides that produce the color. Unlike dyes that produce an even color, SureStain produces the multi-hued, variegated, mottled look of natural stone.
Specifications:
Packaging: (1) Gallon container
Coverage: 200 sq ft per gallon
Dilution Rate: Varies from no water dilution to approx. 4:1 / water
Colors: 8
Application: Sure Stain (Earth Tones) Apply first coat with SP sprayer on dry surface using caution to avoid track lines from the spray pattern. A circular motion with the wand is desired. Earth Tones may be applied full strength or diluted with water to desired rate. The first coat may be brushed or brushed into the surface. Use color-fast, acid resistant brushes or brooms. If stain is brushed, maintain a wet edge, never allow a wet broom to drag across a dry slab, as it may leave a permanent streak or brush stroke. Areas that may call for brushing are sloped surfaces, slabs with bird baths, stamped concrete, and overlays. Do not walk on the wet surface. Footprints will appear darker than the adjacent areas. If stepped on by accident, the footprints should be brushed out immediately. Allow the first coat to dry to the touch. Apply second coat in the same manner as the first coat, as described above. Do not brush the second coat. Allow to dry overnight.
Multiple Colors: Colors may be layered or alternated as desired. For crisp, distinct, and separate color changes, a score line should be utilized. Chemical stain will bleed across traditional masking. Shielding or masking at a score line will prevent the bleeding of colors as long as the stain is not puddled heavily at score lines.
PDF Download SureStain Color Chart (150K)